Updating Debian squeeze to wheezy

Find word squeeze and replace with wheezy. At the end it should look as follows:

 
deb http://mirrors.kernel.org/debian/ wheezy main
deb-src http://mirrors.kernel.org/debian/ wheezy main

deb http://security.debian.org/ wheezy/updates main
deb-src http://security.debian.org/ wheezy/updates main

# wheezy-updates, previously known as 'volatile'
deb http://mirrors.kernel.org/debian/ wheezy-updates main
deb-src http://mirrors.kernel.org/debian/ wheezy-updates main

To update the package list, enter:

# apt-get update

do a update of the base system, enter:

# apt-get upgrade

Now upgrade the rest of the system, enter:

# apt-get dist-upgrade

Reboot the system:

you can verify your debian version by entering:

$ lsb_release -a

the output should look something like this:

No LSB modules are available.
Distributor ID:	Debian
Description:	Debian GNU/Linux 7.0 (wheezy)
Release:	7.0
Codename:	wheezy

Configuring Samba to be a WINS server

This is quite easy to do, and it makes browsing the smb network fast.

Configuring the server:
simply edit smb.conf (typically located at /etc/samba/smb.conf)
locate the the wins support and enable it.:

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = yes

setup the way samba should resolve the hosts:

# What naming service and in what order should we use to resolve host names
# to IP addresses
#   name resolve order = lmhosts host wins bcast
   name resolve order = host wins bcast

The following option should be addet to the linux DHCP server (if you use linux as a DHCP server):

option netbios-name-servers x.x.x.x;

where x.x.x.x is the IP of the WINS server

If you use a normal router, sometimes they support pushing out the wins server, if you use a router running dd-wrt
go tothe  basic setup and add the WINS server IP, there.

If this fails you can add the WINS server manually to windows:
go to the control panel, and press the View network status and tasks, then press the change adapter setting
right click the network interface and select properties, select the TCP/IP (for windows 7 select TCP/IPv4)
and press properties again click advanced and select the WINS  and add the IP of the WINS server and you are ready to go

WINS_server_win7

For linux clients simply edit the smb.conf and add the following:

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
   wins server = x.x.x.x

replace x.x.x.x with the IP of the WINS server

Happy smb surfing 🙂

How to fix/hack the Samsung CLX-3175FW, imaging unit

Well the place where i do some voluntary work, had this Samsung CLX-3175FW Color Laser printer for some years now and the unit i starting to show to following warning: “replace imaging unit soon” from the old days doing repairs on different printers at the university, i found that a lot of manufacturers place small fuses, software counters that are supposed to make the user replace different parts in the printers normally these parts are quite expensive, some of these “errors” can sometimes be reset without that much work, and the this was one of them.

What you needs is the following:

A Solderings iron

A 56Ω 0,25watts resistor

Let’s get to work.First thing is to take all the color cartridges out of the printer and place them somewhere safe (be sure not to drop the color powder on anything)

next thing is to remove the wast toner box in the left side, now remove the imaging unit.

image_unit_samsung

you should se 2 cobber contacts in the right side of the imaging unit, this small device can be removed from the unit.

resisitor_samsung

inside the unit that i took apart, there where 2 resistors, the small one, is actual just a  “sense” function that makes the printer aware if the unit is not installed, in my case the resisitor was a 140KΩ, the larger resistor was a 56Ω but this resistor was burned and did no longer function. So this resistor functions as a “new” device put into the printer, the printer then burns this resistor to reset the imaging unit counter.

a quick trip to the storage with a new 56Ω resistor, i removed the old one and soldered the new inside the unit, i used a 1% resistor as this was the only type that i had.

i then put the unit back into the imaging unit, and cleaned the unit for any excess toner, and dust.

then i put everything back into the printer and powered the unit on.

i printed a report for the unit and wolia 🙂 the printer now thinks the imaging unit is new.

report_samsung

i den took the unit apart again and checked the resistor, somehow the printer didn’t burn i properly so i remove the resistor , just to be sure that i didn’t break anything, maybe the original samsung placed resistor is easer to burn?, but hey what the heck it did the job.

This fix/hack cost around 0.50DKR, and a new imaging unit cost around 900-1100DKR so witch one do you chose?.

The philosophy of naming computers

I always liked the idea of having a naming scheme for naming computers, from the days when i worked at the university they gave servers, names after planets like Uranus and Neptune, when i later started setting up computers at home i went on with my own naming scheme i selected the Norse mythology, later on i started using the different elements for machines outside my network. i seen people using many different naming schemes like, movie stars, diary products.

it gives the machines something personal meaning and it’s funny when people ask why they are named the way they are, no matter what, it’s a good ice breaker :).

Even the laptop I’m using for writing this post is named Njord :).

Here’s a list of possible naming schemes that i like:

if you want more possible naming schemes take a look at namingschemes.com there should be a scheme for everybody :).

Happy naming.

 

The Remote DVD player project.

What to do when you just get the urge to watch a DVD movie?
well over time i discarded alle my DVD players and went on using Popcorn Hour A110/WD TV Live Media players

I discovered the project called DVDReadFS The project enables a machine to read a DVD and remove the macro vision on the fly,

first i installed the following packages:
libdvdcss, fuse and the fuse-devel packages

then followed the guide at DVDReadFS for compiling DVDReadFS, i ended up making a permanent mount point in /etc/fstab

dvdreadfs#/dev/hdd /mnt/dvd1 fuse ro,kernel_cache,allow_other 0 0

I then shared the mount point in samba. Now the only thing i need to do when i wanna watch a DVD movie is to  drop a DVD in the drive and open the share on my media player

i will post some more installation details when i will me making my small networked DVD player, using a VIA C7 and a old DVD drive built into a discarded Cambridge CD audio case that i will modify, to fit the PC and drive.

to be updated!.

 

Solving the: No interfaces problem with Wireshark in Ubuntu/Lubuntu

Run the following in the Terminal:

Code:
sudo addgroup -quiet -system wireshark
sudo chown root:wireshark /usr/bin/dumpcap
sudo setcap cap_net_raw,cap_net_admin=eip /usr/bin/dumpcap

Then run the following changing YOUR_USER_NAME onto your user name:

Code:
sudo usermod -a -G wireshark YOUR_USER_NAME

That’s it. No need to restart or even log off. Just start Wireshark and select the network interface.

Add the Quick Launch Bar to the Taskbar in Windows 7

To add the toolbar back, you’ll want to right-click on an open area of the taskbar, and choose Toolbars \ New Toolbar from the menu. You should probably also unlock the taskbar at this point.

sshot55

Now’s the slightly tricky part… you’ll want to paste the following path into the location bar:
%appdata%\Microsoft\Internet Explorer\Quick Launch

image91

Make sure that the location bar shows the full path, like the next screenshot, before you choose the “Select Folder” button.

image92

You’ll immediately notice the Quick Launch toolbar on the taskbar, but it’s all the way over on the right, so you’ll want to click on the dotted lines and then drag the toolbar all the way to the left (which is slightly tricky sometimes). Note that you’ll need to right-click and unlock the taskbar before you can move the toolbar.

sshot71

There we go, it’s over on the left… but now you’ll want to adjust the regular taskbar toolbar to be closer to the left, so use the dotted lines to drag it over as well.

sshot72

The normal Quick Launch that we’re used to doesn’t have text, so right-click on the dotted lines and uncheck “Show Text” as well as “Show Title” from the menu.

sshot57

Once you’re sure it’s the way you want it, you should check the “Lock the taskbar” again.

sshot731

And there you are, the quick launch bar has returned and there’s virtually no way anybody would know this is Windows 7.

PXE Booting The Soekris NET4501 and Net4801

Well had a Soekris NET4801 for a longtime initially i build the image on a old machine that i discarded for many years ago, i did a quick search on the net for some interesting links about PXE booting the Soekris
i Found the following sites of interest:

Used this guide for the basic setup of the DHCP and TFTP Server and Config of the PXElinux.conf:
Setup ad DHCP and a PXE Boot server

if you need a little more reading this page will give som ideas to:
Install Ubuntu over PXE netboot (headless using serial terminal) on a Soekris Net4801

The NET4801 is not that fast and it will take some time to install the system, my system is only based on a compact flash card.